Requires: Wire Stripper, Small Flat Screwdriver, Two sizes of Wago connector are found on the PDP: To use the Wago connectors, insert a small flat blade screwdriver into the rectangular hole at a shallow angle then angle the screwdriver upwards as you continue to press in to actuate the lever, opening the terminal. The next step will involve using the Wago connectors on the PDP. Using a 7/16” (11 mm) box end wrench, remove the nut on the “Batt” side of the main breaker and secure the positive terminal of the battery connector Lift the lever above the black main power input terminal on the PDH until it clicks into place. Requires: Battery Connector, 6 AWG (16 \(mm^2\)) terminal lugs, 7/16” (11 mm) Box endĪttach terminal lug to positive (red) wire of battery connector. To maximize pullout force and minimize connection resistance wires should not be tinned (and ideally not twisted) before inserting into the Wago connector. Two sizes of Wago connector are found on the PDH: To use the Wago connectors, open the lever, insert the wire, then close the lever. The next step will involve using the Wago connectors on the PDH.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |